Magazine for the professional nail industry.
Issue link: http://nailsmag.epubxp.com/i/168588
S PPER I CLE N CUTI If you have large hands, look for nippers with long handles. ss Stainle obalt man C 1/4 Jaw eezer r wn: Tw ticle Nippe sho el Cu Ste No spring, single-spring, and double-spring configurations are available. The spring controls the handle tension. The tension level is personal preference, though many techs prefer the doublespring design as it prevents metal from rubbing on metal. Look for a nice sharp blade that cuts through the tip without applying pressure. If you start to notice the tool putting pressure on the tip as it's cutting it, the blade needs replacing. Pressure can cause cracks, which can't always be seen by the naked eye. Keep nipper joints clean and freshly oiled to avoid rust. If rust appears, clean the joint, add more oil, and wipe of excess. Jaw size (1/8, 1/4, 1/2, and full) is a matter of personal preference. Smaller generally gives you more control, but some techs prefer to remove more cuticle at once via a larger size. Purchase a tip cutter that ofers the shapes you want, whether that's round or straight. If your nippers aren't cutting without pulling at the skin, it's a tell-tale sign you need to have your tool sharpened or replaced. TIP CU T sho w The n: M eh Ori gin az Pro al E dge fessio nal Cut ter 114 TER For all metal implements, stainless steel is the best option, as it can stand up to repeated disinfection without rusting or corrosion. 144 | NAILS MAGAZINE | OCTOBER 2013 >>>